Follow the guidelines mentioned to minimize the risk of damage or loss of cargo and ensure the safety of the products. Shipping container corner castings play a critical role in handling and lifting containers. Conclusionĭoing a proper inspection of each container corner casting and choosing the right ones can ensure safe transportation of the cargo. Anything below 18 millimeters in thickness means that the corner casting and shipping container isn’t ISO standard. ISO requirements Cast from high grade steel Designed for low temperature, working at -40c as standard Made in accordance with ISO1161/BS 3951 Lloyds. Conversely, the bottom corner castings have two stadium-shaped holes located on two sides.Īlso, evaluate the thickness of the steel corner casting. Each set has 8 corner pieces, which are used to make containers or frames. ![]() Top corner castings contain a stadium hole on the long side of the container and a shield hole located on the rear or front of the container. This investment steel casting type corner casting is a special type, where a normal casting has been adapted as much as the steel material allow. ![]() If the container has been painted over and the marketing isn’t visible, you can look at the corner castings to determine whether the shipping container is ISO standard or not.Īll ISO standard corner castings should have the following shapes. ![]() Check under the container number on the top right-hand corner, where the four-digit code should be printed as well. All ISO standard shipping containers will have a four-digit code printed on the top right-hand corner of the door.
0 Comments
Leave a Reply. |